Length of a V8 Monza clutch fan

[58Hemifury]

Could someone with a V8 Monza clutch fan measure it from where it sits on the pulley to the closest point to the radiator. Also I'm finding information on fans for cars with A/C and without, does anyone know the difference?
Thanks

[Smiley]

Early V8 Monza's used a solid 7 blade fan, which is what I am still using. In 1977 there was a design change in the radiator area to allow a clutch fan to be used.

How much room do you have between the radiator and the water pump shaft ?

Mike, here's is what I have for you. The total depth of the clutch is 2-3/16" from front of the clutch to the water pump face.

The distance from the blade mounting surface to the water pump is approx 3/4"

The blade diameter is 17-1/4"

Not sure if this helps, but here's a picture of it.

Carl

From: twelve_second_vega_REMOVE_623990_THIS_@yahoo.com
"I have a V8 Monza (7) Blade fan GM Part #1252465.
I have seen about 10 or 12 V8 Monza's out here and I
have never seen one with anything other than a 2-row
radiator. This fan came off a 1979 Monza V8 with A/C and it
had a 2-row radiator.

With a 2-row core,
there seems to be enough room to use the (7) blade fan.
But with a 3 or 4 row core, there is very little
room."

[jed14]

Anybody know WHERE to get one?

Thanks!
Joe