Second Gen H Tach Jumper Settings

Moderator: Moderators

Second Gen H Tach Jumper Settings

Postby zeke » Thu Jul 20, 2017 1:13 pm

Common issue is for jumper and pin to come out of tach and found lying in gauge cavity. Tach thinks its a 4 cyl now, so will read high on a 6 or 8 cyl.
tachometer_hbody.jpg (140.89 KiB) Viewed 1042 times

zeke's 79 Monza Project

zeke's 78 Sport Coupe

Photographs posted by this user (zeke) are the sole property of this poster. Any use without express written permission is prohibited
User avatar
Posts: 2784
Joined: Fri Jul 21, 2006 3:27 am
Location: Southern Ontario, Canada

1979 Chevrolet Monza 2+2

Re: Second Gen H Tach Jumper Settings

Postby 79MonzaSpyder » Wed Nov 21, 2018 7:14 pm

Great post with good pictures and identification. I will be needing this, swapping a V6 Gauge setup into a V8 no gauge car, so I get to swap the dash harness over too.
The Fleet
05 Toyota Camry SE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (upcoming Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
Posts: 214
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Return to Electrical and Wiring

Who is online

Users browsing this forum: No registered users and 1 guest