by RedFiveKBS » Thu Feb 11, 2016 12:37 am
I'm in the process of sourcing all the items I think I want/need for Phase 1.
Front suspension bushings and rebuild kit from PST (Polygraphite), new springs, Lakewood shocks, manual steering swap, rear suspension rebuild with UMI Performance components (LCA and Panhard), and upgrading the 7.5" rear with 3.42 or 3.73 gears (posi). It will get the S10 spindle and axle swap to 5-lug. Planning 15x7 front and 15x8 rear with American Racing Torq-Thrust's.
I find it hard to believe out of all the sources that NO ONE seems to make an after market torque arm; not Spohn, or UMI, or BMR. I emailed Overkill but did not get a response. Its just like a long ladder bar so when it is time I'll just fab one up and buy some rod ends, adjuster, etc. Anyone else make one?
Phase 2 will be paint and body. I intend to keep it more or less looking stock. Debating going to original Sterling Silver, a darker shade like gun metal gray, or keeping the Firethorn red. Thoughts?
Phase 3 will be motor/transmission. LS3 (crate 480hp) and TH350 with 2500 stall.
Phase 4 will be interior. Again, stock appearance but maybe better seats? Gauge updates all around; speedo, tach, fuel, oil, temp.