by megavega » Fri May 18, 2018 10:23 pm
ok, so I whipped up the tranny crossmember and installed it today, that's off the list. I started with some small rectangle mild steel tubing, drilled and tapped the top of it so the front seat track bolts will install thru floor into top of it. I then drilled (3) 1/2" holes in the floor and plug welded the floor to the tubing top, then welded it to the rocker panel pinch seams underneath on each end.
You do not have the required permissions to view the files attached to this post.
Last edited by
megavega on Fri May 18, 2018 10:31 pm, edited 1 time in total.
1972 hatchback, 28,000 orig miles, 427BBC/twin T4 turbo's/T56 six speed/big wheels, lowered down pro touring style-work in progress....
1973 vega wagon-under the blue flame knife.