by Howler73 » Thu Apr 15, 2021 7:33 pm
After 5 years I'm finally putting my Monza back together. I'm trying to get the torque arm bolted back in but I can't get the bracket to bolt onto the transmission. The holes won't line up. I have the service manual and it shows 2 different looking brackets in 2 different chapters. And it does appear that I may have a bracket for an auto trans rather than for my Saginaw 4speed. Here's a picture of the one I have.
The 3 holes on the transmission are not straight across with one being a little farther apart from the other and at a downward angle. Does anyone have a picture of one they know goes on a 75 Monza with a 4sp and of the orientation it goes onto the transmission? The service manual also shows it attaching in 2 different ways.
Thanks,
Ken
You do not have the required permissions to view the files attached to this post.
1975 Blue Chevy Monza, 350ci, 4 speed