BRAKE PROPORTIONING VALVE REBUILD KITS

Moderator: Moderators

BRAKE PROPORTIONING VALVE REBUILD KITS

Postby monzaaddict » Sat Oct 03, 2020 12:38 am

BRAKE PROPORTIONING VALVE REBUILD KITS
https://www.musclecarresearch.com/

Combination and Prop Proportioning Valve Bleed Bleeder Tool PV2 PV4 Tool
https://www.inlinetube.com/products/pvtool

76-80 brake lines SKU:CVB7802
https://www.inlinetube.com/products/cvb7802

aftermarket disc drum proportioning valve
https://www.inlinetube.com/products/pr102
monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm


Re: BRAKE PROPORTIONING VALVE REBUILD KITS

Postby monzaaddict » Tue Jan 19, 2021 2:07 am

if anyone is interested in the inner workings of a combination valve
You do not have the required permissions to view the files attached to this post.
monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm

Re: BRAKE PROPORTIONING VALVE REBUILD KITS

Postby monzaaddict » Tue Jan 19, 2021 2:21 am

To disassemble combination valve. 1)mount in vice and remove switch with 6 point socket. 2)Remove rear piece using 6 point socket. rear proportioning spring and valve will come out. spring is deep inside body and may need some coaxing. 3) Place combination valve body in vice so that front metering valve cap is squeezed into cavity until end cap is almost flush with valve body. This allows c clip removal. 4) With c clip removed use two flat blade screwdrivers to remove metering valve cap. grab metering valve pin with needle nose pliers and pull out. 5) use a drift pin and hammer if needed to drive safety valve shuttle switch pin out back of valve body. 6) Clean body using dremel tool and wire wheels. small internal bore can be cleaned with rifle brushes either by hand or mounted in drill. Clean with brake cleaner and compressed air.
Last edited by monzaaddict on Wed Jan 20, 2021 3:29 pm, edited 1 time in total.
monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm

Re: BRAKE PROPORTIONING VALVE REBUILD KITS

Postby monzaaddict » Wed Jan 20, 2021 11:41 am

Parts labeled. this is a Delco Moraine combination valve.
You do not have the required permissions to view the files attached to this post.
monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm

Re: BRAKE PROPORTIONING VALVE REBUILD KITS

Postby monzaaddict » Sat Jan 23, 2021 11:26 am

combination valve info pages 0-19 thru 9-23

https://oljeep.com/gw/74_tsm/9-BrakesWheels.pdf
monzaaddict
 
Posts: 2599
Joined: Sun Jul 02, 2006 3:04 pm


Return to Suspension, Steering, & Brakes Tech

Who is online

Users browsing this forum: No registered users and 4 guests