Pump gas street Vega/Monza..combo/timeslips

Moderator: Moderators

Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Sat Jan 23, 2016 1:41 am

Hey guys with pump gas small blocks/LS. Post your combination up along with best times. Fun to compare and contrast. My dads Vega has not made it out yet but hopefully soon!
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am


Re: Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Sat Jan 23, 2016 2:20 pm

1972 Vega...all steel

406 sbc
11 to 1 comp ratio
Dart 215 aluminum heads...1.6 roller rockers
4340 Scat crank
4340 Scat H beams..6"
Srp Forged pistons
Victor Jr intake
Quickfuel Black Diamond 750 DP
Edelbrock 110 mech fuel pump
Sumped stock tank....-8 line(1/2") from tank to carb
Lunati HR cam.....226/234 at .050....565/565 lift......112 lsa
Sanderson swap headers
2.5" mandrel bent dual exhaust.....X pipe...Magnaflow round style muffs...full tails
Built TH700r4 trans...Edge 9.5" lock up converter....3200 rated stall
S10 10 bolt.....3.42 posi
235/60/15 MT drag radials

ET....11.54 at 118.6 mph......95.6 1/8
Last edited by 6D9 on Mon Dec 05, 2016 11:42 am, edited 2 times in total.
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Sun Jan 24, 2016 4:44 pm

Dang almost 30 views but no responses. I figured a few would post up.
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby 77nighthawk » Sun Jan 24, 2016 6:04 pm

As soon as my Monza is done, and the weather, and my job permits, I'm taking mine to the track, for some tuning time. I'll post results then. Brad
If it don't scare me, I don't want it.

the growing collection
1977 nighthawk
1979 Monza hb
User avatar
77nighthawk
 
Posts: 243
Joined: Thu Feb 24, 2011 1:26 am
Location: Kansas

Re: Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Sun Jan 24, 2016 7:22 pm

77nighthawk wrote:As soon as my Monza is done, and the weather, and my job permits, I'm taking mine to the track, for some tuning time. I'll post results then. Brad


Right on thanks. Could you post up the complete motor combo and drivetrain set up too. Thanks!
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby EVL VEGA » Tue Jan 26, 2016 11:34 am

1973 Vega Hatchback (All steel except molded lips on rear fenders)
406 sbc
stock bottom end
cheapo speedpro forged pistons
low compression (around 9-9.5:1)
91 octane crappy california pump gas
ported stock iron heads
victor jr intake
holley 750 double pumper
transbrake
5000stall
TH400
4.33 gears
drove it 30 minutes to the track (only 1/8th mile ones around here)
This was about 6 years ago. (old heads) Don't have the slip in front of me..only remember times.
Best NA pass was 7.2 in 1/8th
Best 100shot N20 was 6.97 in 1/8th (pulled the wheels on this pass)
EVL VEGA
'73 Vega Hatchback (former Super Gas car)
406 SBC, AFR 210 Eliminator Heads, 9:1 comp, pump gas, 328RWHP/412RWTQ (old heads, no N2O 1/17/04), 6.86 @ 100.8 in 1/8th (No N20 9/4/16), Mike's Trans TH400 (reverse manual), 5000 stall, 12 bolt, 35 spline strange axles, 4.33 gears, spool, hipster transbrake, linelock, backhalved, Alston 3 link, 100 shot NX Hitman+ kit, LC1 Wideband sensor, 31x18.5 MT Sportsman Pros, "Plum Ugly"™ Purple paint.
"Pound to fit..paint to match"
Image
User avatar
EVL VEGA
 
Posts: 211
Joined: Thu Oct 08, 2015 6:31 pm
Location: San Diego, CA

1973 Chevrolet Vega

Re: Pump gas street Vega/Monza..combo/timeslips

Postby avewhtboy » Tue Jan 26, 2016 4:26 pm

I took my car to the strip just after I purchased it. The specs on the car I was given were as follows.

327 (four bolt main) aren't they all, I saw someone post lol
full manual TH350 2500 stall
4.56 mini spool in a Ford 9 inch
MT 28x9.50 tires
was told ran 11.70

my actual knowledge is its not a four bolt main
no idea what size motor it is, specs out as 350 block/heads
Posi not working, its a peg legger and had really bad wheel hop
14.0 at 98 mph in 1/4 were the times I got, was really disappointing...
User avatar
avewhtboy
 
Posts: 573
Joined: Thu Sep 24, 2009 11:06 am
Location: Stone Mountain Georgia

Re: Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Tue Jan 26, 2016 6:20 pm

Awesome guys thanks for posting! Good info!
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby EVL VEGA » Tue Jan 26, 2016 6:26 pm

I'll be going back to the track when it warms up as well. (Not that it's freezing..68 at dragstrip today)
Gotta see how these AFR heads do.
I'll make sure to post some numbers.
EVL VEGA
'73 Vega Hatchback (former Super Gas car)
406 SBC, AFR 210 Eliminator Heads, 9:1 comp, pump gas, 328RWHP/412RWTQ (old heads, no N2O 1/17/04), 6.86 @ 100.8 in 1/8th (No N20 9/4/16), Mike's Trans TH400 (reverse manual), 5000 stall, 12 bolt, 35 spline strange axles, 4.33 gears, spool, hipster transbrake, linelock, backhalved, Alston 3 link, 100 shot NX Hitman+ kit, LC1 Wideband sensor, 31x18.5 MT Sportsman Pros, "Plum Ugly"™ Purple paint.
"Pound to fit..paint to match"
Image
User avatar
EVL VEGA
 
Posts: 211
Joined: Thu Oct 08, 2015 6:31 pm
Location: San Diego, CA

1973 Chevrolet Vega

Re: Pump gas street Vega/Monza..combo/timeslips

Postby Smiley » Tue Jan 26, 2016 7:46 pm

avewhtboy wrote:I took my car to the strip just after I purchased it. The specs on the car I was given were as follows.

327 (four bolt main) aren't they all, I saw someone post lol
full manual TH350 2500 stall
4.56 mini spool in a Ford 9 inch
MT 28x9.50 tires
was told ran 11.70

my actual knowledge is its not a four bolt main
no idea what size motor it is, specs out as 350 block/heads
Posi not working, its a peg legger and had really bad wheel hop
14.0 at 98 mph in 1/4 were the times I got, was really disappointing...


Almost all factory 327's were small journal steel cranks and 2 bolt main blocks.
The 4 bolt blocks came out about when they switched to large journals and by then 350's replaced the 327's.
User avatar
Smiley
 
Posts: 1002
Joined: Tue Jul 17, 2012 2:50 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby EVL VEGA » Tue Jan 26, 2016 7:53 pm

Smiley wrote:Almost all factory 327's were small journal steel cranks and 2 bolt main blocks.
The 4 bolt blocks came out about when they switched to large journals and by then 350's replaced the 327's.


I think he's joking about the fact that that every used car/motor you buy is a "4 bolt main". Also it's always "forged" parts but they never seem to have receipts for them. :mrgreen: :bang: (of course you can check the block specs with the casting number..a little harder to tell what guts are in a motor from the outside)
EVL VEGA
'73 Vega Hatchback (former Super Gas car)
406 SBC, AFR 210 Eliminator Heads, 9:1 comp, pump gas, 328RWHP/412RWTQ (old heads, no N2O 1/17/04), 6.86 @ 100.8 in 1/8th (No N20 9/4/16), Mike's Trans TH400 (reverse manual), 5000 stall, 12 bolt, 35 spline strange axles, 4.33 gears, spool, hipster transbrake, linelock, backhalved, Alston 3 link, 100 shot NX Hitman+ kit, LC1 Wideband sensor, 31x18.5 MT Sportsman Pros, "Plum Ugly"™ Purple paint.
"Pound to fit..paint to match"
Image
User avatar
EVL VEGA
 
Posts: 211
Joined: Thu Oct 08, 2015 6:31 pm
Location: San Diego, CA

1973 Chevrolet Vega

Re: Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Tue Jan 26, 2016 8:28 pm

EVL VEGA wrote:I'll be going back to the track when it warms up as well. (Not that it's freezing..68 at dragstrip today)
Gotta see how these AFR heads do.
I'll make sure to post some numbers.


Cant wait to see how the car responds to the new AFR's. We just did a kinda similar swap on my buddies 65 Stang. Went from Edelbrock Performer heads (small valve) 170 runner to some killer AFR 195's. Car usually runs 12.0's at 111 to 11.75 at 115.
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby 6D9 » Tue Jan 26, 2016 8:33 pm

avewhtboy wrote:I took my car to the strip just after I purchased it. The specs on the car I was given were as follows.

327 (four bolt main) aren't they all, I saw someone post lol
full manual TH350 2500 stall
4.56 mini spool in a Ford 9 inch
MT 28x9.50 tires
was told ran 11.70

my actual knowledge is its not a four bolt main
no idea what size motor it is, specs out as 350 block/heads
Posi not working, its a peg legger and had really bad wheel hop
14.0 at 98 mph in 1/4 were the times I got, was really disappointing...


Yeah thats a bummer when it doesn't come close to what you were expecting. What carb,intake,gears,exhaust,timing curve?
72 Vega GT...406 sbc..TH700R4...3.42 gear...235/60/15 MT DR's....11.54 at 118.6..Dad's car
72 Vega GT...4cyl..4 speed..all stock
6D9
 
Posts: 184
Joined: Tue Sep 30, 2014 12:48 am

Re: Pump gas street Vega/Monza..combo/timeslips

Postby avewhtboy » Tue Jan 26, 2016 9:23 pm

6D9 wrote:
avewhtboy wrote:I took my car to the strip just after I purchased it. The specs on the car I was given were as follows.

327 (four bolt main) aren't they all, I saw someone post lol
full manual TH350 2500 stall
4.56 mini spool in a Ford 9 inch
MT 28x9.50 tires
was told ran 11.70

my actual knowledge is its not a four bolt main
no idea what size motor it is, specs out as 350 block/heads
Posi not working, its a peg legger and had really bad wheel hop
14.0 at 98 mph in 1/4 were the times I got, was really disappointing...


Yeah thats a bummer when it doesn't come close to what you were expecting. What carb,intake,gears,exhaust,timing curve?


It has a Demon 750 Air gap intake and the timing appears to be locked at 40 degrees which means it has no compression I believe.
It had the 1 3/4 inch hooker headers with dynomax mufflers 3 inch pipes.

It's much different now so I am interested to take it to the track again see if I made it slower!
Same motor carb, but smaller 1 1/2 Sanderson Headers, 5 speed manual 3.73 with posi traction 265/35/18 tires

I suspect it will be slower.

Image
User avatar
avewhtboy
 
Posts: 573
Joined: Thu Sep 24, 2009 11:06 am
Location: Stone Mountain Georgia

Re: Pump gas street Vega/Monza..combo/timeslips

Postby avewhtboy » Tue Jan 26, 2016 9:29 pm

EVL VEGA wrote:
Smiley wrote:Almost all factory 327's were small journal steel cranks and 2 bolt main blocks.
The 4 bolt blocks came out about when they switched to large journals and by then 350's replaced the 327's.


I think he's joking about the fact that that every used car/motor you buy is a "4 bolt main". Also it's always "forged" parts but they never seem to have receipts for them. :mrgreen: :bang: (of course you can check the block specs with the casting number..a little harder to tell what guts are in a motor from the outside)


yes exactly so frustrating.
User avatar
avewhtboy
 
Posts: 573
Joined: Thu Sep 24, 2009 11:06 am
Location: Stone Mountain Georgia

Next

Return to Drag Racing

Who is online

Users browsing this forum: No registered users and 4 guests

cron