V8 spark plug wire routing

Research results, details, and so on

Moderator: Moderators

V8 spark plug wire routing

Postby 79MonzaSpyder » Fri Mar 05, 2021 1:38 am

V8 spark plug wire routing.So on the driver side. I have the stock exhaust manifold, the metal cover for the thermostatic air clean connection and the heat shield directly below the exhaust manifold that protects the plug wires are the 1, 3 and 5 cylinders. From what I can tell the plug wires go down the back corner of the block and the either route between the block and exhaust manifold to ge5 to the 1, 3 & 5 cylinders or it goes between the exhaust manifold and the frame rail of the car. I’m not sure which is correct. Can someone clarify which is right. Also is there anything that shields the wires as they pass the exhaust manifold? Is the a shield or tube the go through? Pics would be very helpful. I have attached a pic of wha5 I have. It’s not my engine but mine looks the same as this picture.
You do not have the required permissions to view the files attached to this post.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2


Return to Factory Original Purist

Who is online

Users browsing this forum: No registered users and 5 guests

cron