Page 80 of 83

Re: zeke's Monza

PostPosted: Tue Jun 08, 2021 11:37 pm
by zeke
Welcome to page 80!

VIDEO CLIP

My trunk release solenoid burnt up on me. That model was NLA so got a different one from Amazon and made it work. The output pulse from the remote brain was well over a second long and was frying the solenoid coil. I used a capacitor in series with the relay coil to shorten the time the relay is energized to a quarter second. Should be good now

Re: zeke's Monza

PostPosted: Mon Jun 21, 2021 7:08 pm
by zeke
brrr

Re: zeke's Monza

PostPosted: Tue Jun 22, 2021 11:26 am
by Kenova
Yeah, I'm jealous. :lol:

Ken

Re: zeke's Monza

PostPosted: Mon Jun 28, 2021 5:29 pm
by zeke
Had no superheat, removed some refrigerant, got 7 F SH now and vents still blow 50 F

P/S pump making a racket so that's next

https://www.rockauto.com/en/moreinfo.ph ... hu9ZwRNezc

Re: zeke's Monza

PostPosted: Fri Jul 02, 2021 3:39 pm
by zeke
Three spots need to be sealed on outside of the tank but pump didn't come with right ones so I used silicone.

Re: zeke's Monza

PostPosted: Fri Jul 02, 2021 3:44 pm
by zeke
Capped off the return and hi pressure out for a leak test on the bench. I filled the reservoir to the top, extended hose to floor pan, started car for 2 s, refilled reservoir, ran for 2 s, put return together. Flushed out all the old crap from lines and gear box, took about a half liter to do it. No more P/S noise!

Re: zeke's Monza

PostPosted: Sat Jul 24, 2021 11:10 am
by zeke
Installed a brand new fan and added a thermostatic switch to the A/C clutch circuit

Re: zeke's Monza

PostPosted: Sun Jul 25, 2021 6:27 pm
by zeke
Bushing chewed out on one of my power window winder heads. I had it secured to far away to the door so it walked out. Flipped the bushing around and put a smear of epoxy in it. Added some screws to the mounts on both doors and they work good again.

Re: zeke's Monza

PostPosted: Thu Aug 05, 2021 7:31 am
by zeke
Good air flow now! Also found that I hadn't installed the RH kick panel properly and it was binding up the outside air door vacuum servo.

Re: zeke's Monza

PostPosted: Sun Aug 29, 2021 5:48 am
by zeke
.

Re: zeke's Monza

PostPosted: Wed Sep 15, 2021 6:51 am
by zeke
Scored some more parts at the Monzaque

Re: zeke's Monza

PostPosted: Thu Sep 23, 2021 12:33 am
by Diesel Dan
Keep the pictures coming!
IMO, this detailed information is something FB has not (can not?) duplicate.

Re: zeke's Monza

PostPosted: Thu Sep 23, 2021 11:15 pm
by 79MonzaSpyder
Completely agree.

Re: zeke's Monza

PostPosted: Sat Oct 16, 2021 10:12 am
by zeke
Thanks guys! Haven't done much lately but drive it. Rainy day here so working on installing a free to me, 6AL ignition box. Tested and works, now where to mount it :lol:

Re: zeke's Monza

PostPosted: Sun Oct 17, 2021 12:33 am
by Diesel Dan
Car looks good!

Wonder if if the quality of the MSD has improved. Years back the guys I knew that ran them kept a spare on hand because of high failure rates. MSD: My Spark Disappeared. :D