Project Spyder Clone

Tell everyone about the progress of your project! Please respect people's threads.

Moderator: Moderators

Re: Project Spyder Clone

Postby 79MonzaSpyder » Mon Apr 26, 2021 3:47 pm

nope, no V8's for 1980. I always wanted a V8 Monza but ended up buying a V6 (blue car), just couldn't find a nice stockish factory V8 that wasn't priced well beyond reasonable, most had been shit kicked and beaten to death and at that time I wasn't in to a project of that magnitude. So, after my son took a turn at my blue Monza and blew it up a couple times he parked and and bought the 1980 Teal roller that was born as a V6 4 speed but someone had put a 350 in it before we bought the car. My son's plans were to take the good stuff off the blue car and build the Teal car but his build concept exceeded his budget and the idea died. Flash forward a few years and we are going to build a mild 305 4 speed car to start with as I have most of the bits to do that on a reasonable budget. And then once its on the road we can start enjoying it we will probably build a mild 350 for it. But to start we just want to get it back on the road again, you simply do not see these cars on the road where I live anymore. Someone has a coupe near me, mostly stock, unrestored but cared for. That's the only Monza/Sunbird/SkyHawk I have seen in the last 5 years.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2


Re: Project Spyder Clone

Postby 79MonzaSpyder » Wed Jun 23, 2021 11:03 pm

Finally got some time back on the Monza, My Eastwood order finally arrived after 3 months. So I got my exhaust manifolds and heat shields painted, used the brush on for the manifolds and spray for the heat shields, will see how well it holds up. At least it will start out looking nice. Also installed my Bob Gumm Motor mounts. Just have to make a bracket for my dip stick since the original on is missing.
You do not have the required permissions to view the files attached to this post.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby GermanMonza » Sat Jun 26, 2021 3:17 pm

Beautiful!
User avatar
GermanMonza
 
Posts: 88
Joined: Fri Oct 16, 2020 6:20 am
Location: Erlangen / Germany

Re: Project Spyder Clone

Postby 79MonzaSpyder » Fri Nov 04, 2022 12:58 am

Hoping to get back at this soon with my son. Life has been really getting in the way.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby 79MonzaSpyder » Tue May 30, 2023 12:07 am

Well, close to a year of zero progress on the Monza, still have a couple projects in front of it. So, I decided to do something on it today that I could get done in a few minutes. Sometimes its the stupidest little things that give a feelings of at least some progress and accomplishment. I made and installed the Spyder decal for the rear hatch. The car is missing all the Spyder decals and since it will be some time before we get to body work and paint I am going to install a set of Spyder graphics on the old paint just while we drive it around and they will work as a test run for the final decal install for when we get the paint work done.
You do not have the required permissions to view the files attached to this post.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby 79MonzaSpyder » Fri Jun 16, 2023 4:06 pm

Did the sides today.
You do not have the required permissions to view the files attached to this post.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby zeke » Fri Jun 30, 2023 9:39 am

Not bad at all for homemade decals :th:
Chris

zeke's 79 Monza Project

zeke's 78 Sport Coupe

Photographs posted by this user (zeke) are the sole property of this poster. Any use without express written permission is prohibited
User avatar
zeke
 
Posts: 2930
Joined: Fri Jul 21, 2006 3:27 am
Location: Southern Ontario, Canada

1979 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby 79MonzaSpyder » Fri Feb 02, 2024 1:38 am

Well finally getting back on the Monza. Took it out of the garage and washed it. First time it’s seen the light in 10 years. Plan on starting on the rear and tank, drop the tank and then clean and coat it inside and out and I have a new fuel pump for it as well and the tank rubber kit from Clyde. Going to put a fresh coat of undercoat on it to clean it up, no rust under there. And a repaint for the rear end and then a fluid change and all new rear brakes.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby cjbiagi » Fri Feb 02, 2024 7:58 pm

Slow and steady wins the race..............keep us posted.
Clyde.........75 Monza 2+2
User avatar
cjbiagi
 
Posts: 8608
Joined: Sun Jun 25, 2006 2:37 pm
Location: Glenwood, Illinois

1975 Chevrolet Monza

Re: Project Spyder Clone

Postby 79MonzaSpyder » Sat Feb 03, 2024 3:12 pm

pic of the move,
You do not have the required permissions to view the files attached to this post.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby 79MonzaSpyder » Sat Mar 02, 2024 8:22 pm

Back at it the other day. She’s up on stands and the tank is pulled. Going to pick the best of the 3 tanks I have and then rebuild one. While the tanks out and the rest of the driveline is out we are going to tidy up everything firewall back, clean up the rear diff, (posi unit), new fluid etc and rebuild the rear brakes and replace the flex hose and parking brake cables. Amazed how clean it is underneath, virtually no heavy rust just a bit of surface rust here and there. Going to clean that up. I will post a couple picks next week, need to drop the resolution to post them.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Re: Project Spyder Clone

Postby 79MonzaSpyder » Wed Mar 06, 2024 3:23 pm

A few pic's next is to pull the exhaust and keep just the manifold to post muffler sections, the exhaust is garbage but it will be put back on temporarily to test run the engine and lot drive it until we are ready to put a road day permit on it and take it in for all new exhaust.
You do not have the required permissions to view the files attached to this post.
The Fleet
2018 Toyota Camry XSE V6
79 Chevrolet 3/4 ton Pickup Fully Restored with matching 78 11' Camper
80 Monza 2+2, Cloned into a 79 Monza Spyder V8 4 Speed (Current Project)
80 Monza Spyder V6 Auto (parts car, sadly)
80 Honda CB750K Fully Restored with Custom Full Dress
80 Honda CM400A 10,000 Orig. Miles Full Dress
75 Honda XL250 Fully Restored (first vehicle I ever owned)
73 Honda SL125 off roader
72 Honda Motorsport 250 (XL250) off roader
User avatar
79MonzaSpyder
 
Posts: 282
Joined: Sat Oct 07, 2017 5:28 pm
Location: Langley, B.C., Canada

1980 Chevrolet Monza 2+2

Previous

Return to Project Journals

Who is online

Users browsing this forum: No registered users and 10 guests